-
### Related area
Low power core
### Hardware specification
ESP32C6
### Is your feature request related to a problem?
I am unable to program the low power core of the ESP32C6 with the Ar…
rrrus updated
4 weeks ago
-
There are 2000mW VTXs out there now, so it seems wrong to limit VTX_MAX_POWER to 1000.
-
-
ISSUE TEMPLATE ver. 0.4.0
1. Which TurtleBot3 platform do you use?
- [*] Burger
- [ ] Waffle
- [ ] Waffle Pi
2. Which ROS is working with TurtleBot3?
- [ ] ROS 1 Kinetic …
-
#### Description
Credo transceivers are not coming up after "shut / no shut" on Dell devices. To bring the interface up on Dell side, a flap is required on the peer end.
#### Steps to reproduce …
-
Hey Folks
I have been working on getting LoRaLayer2 working for the purposes of sending sensor data. I'm very excited to have a mesh solution that will have the ability to resolve the line to sight…
-
right now sleep just turns off display. ideally, sleep will:
turn off irda phy
turn off neopixel power
power off screen vreg if possible
lower or disable rp2040 clocks
write state to file in ca…
-
Hi @wuxx, I was wondering if you could potentially give me a bit of advice. You seem responsive on Github :)) and much more experienced than me.
A friend ( @SWPhantom ) and I are working on making …
kxygk updated
4 months ago
-
Have the timer tick over less often? The progress indicator wouldn't be as smooth, more of a tick. The real question is would it consume less power/CPU?
-
Hi,
I'm using an Eachen (eWelink) Zigbee Bridge Pro ZB-GW03 with syssi EspHome firmware [https://github.com/syssi/esphome-zb-gw03](https://github.com/syssi/esphome-zb-gw03) within Home Assistant usi…