-
Testing [this example](https://github.com/dbuezas/lgt8fx/blob/master/lgt8f/libraries/lgt_LowPower/examples/standbyExternalInterrupt/standbyExternalInterrupt.ino) with [nano style](https://github.com/d…
-
When compiling with LowPower.h using Arduino Pro Mini 168 there is still an error present. Same error was reported in July 30 2015 (issue #14).
[code]
In file included from C:\Users\Mysafety\Goo…
-
I have multiple standard arduino `attachInterrupt` calls and one LowPower.attachInterruptWakeup, however all interrupts cause the arduino to wake up, and none of them, if I have no LowPower.attachInte…
-
When using LowPower.attachAdcInterrupt from Adruino LowPower on the Adafruit Feather M0 LoRaWAN, the devices freezes after wakeup from LowPower.sleep() upon calling any draw function unless begin() is…
-
Hello,
I am using the Arduino Low Power library with an MKR1000 board. I have found that when I implement the LowPower.sleep function the sleep cycle is lasting twice as long as the duration is set…
-
Hello
```
#include "LowPower.h"
void setup()
{
Serial.begin(115200);
}
void loop()
{
Serial.println("Bye for 2s");Serial.flush();
LowPower.powerDown(SLEEP_2S, ADC_OFF, BOD_OFF);
…
-
The pico W wakes up from dormancy upon PIR trigger on GPIO 0. However, when this code is preceded by a network connection wlan.connect(ssid, password), the pico W does not wake-up anymore:
# progr…
-
The following code never wakeup after the first sleep call (led always on)
#include
void setup() {
// put your setup code here, to run once:
pinMode(6,OUTPUT);
}
void loop() {
// put y…
-
Hi,
I run sample_multi_transcode like this:
-i::h265 1.h265 -o::sink -hw -la_ext -join
-i::source -o::h265 new.h265 -hw -la_ext -join -lowpower:on
but the error is:
[ERROR], sts=MFX_ERR_DEV…
-
Loading the I2C ports after sleep is not fully set up, lowpower.c misses the inclusion of i2c.h