-
With the new 0.4.3 SDK the 'foculus' is not recognised properly, it seems that this due to the magnetometer calibration data not being emulated
```
simon@bigbox:/storage/ovr_sdk_linux_0.4.3$ sudo ./o…
-
Need to add calibration code and GUI for trackers that require calibration. It should be multi-step controlled by the server. For example, user clicks on "Calibrate gyroscope", server ask the user to …
-
Hello Kriswiner, Thank you for your code and help!
I have a question about the magetometer calibration. How to move the sensor in a figure"8" pattern? Is it put the sensor horizontally on a table an…
-
Hi Kris,
I'm trying to run the AHRS with the new NUCLEO cortex M7.
The fusion rate is around 8000Hz.
But I'm still not able to get any results usable.
I calibrated the magnetometer with your magCalibr…
-
The calibration behaviour has been changed on the magnetometer... no auto-calibration when you instantiate the magnetometer service like previously. This results in no notifications or readings until …
ukBaz updated
5 years ago
-
Hello, I have read your article "Simple and Effective Magnetometer Calibration". Do you have any further information about how to do the automatic calibration and let the users know if the magnetomete…
-
Hello
Thanks for all of this work. I'm really happy that you have made this project!
I'm experiencing some trouble on MacOS. For some reason, I can't calibrate the magnetometer anymore.
When I plu…
-
Hi Kris,
Amazing work porting the MARG into a nice arduino sketch!
I have got it to work with the https://www.sparkfun.com/products/11486, but the yaw values don't range 360 degrees as I rotate the …
-
Hello! I've followed your https://github.com/kriswiner/MPU6050/wiki/Simple-and-Effective-Magnetometer-Calibration guide, but it results in a hard iron bias of {0, 0, 0}. I can see the magnetometer ou…
-
Good day Kris,
This may come across as a weird or trivial question but I have noticed great discrepancies based on which method I use so I thought it was best for me to ask. When you designed the mag…