-
Like described in the instructions for the Arduino IDE you have to "force" the size of the ROM to flash the Heltec Wifikit 32.
Actually you must not change the board name :
```
[env:geiger]
boar…
-
These tools are shipped only in 32-bit linux form. Unfortunately, any build uses dfu-suffix, and that in turn triggers a problem on Travis CI. The solution is probably to track down the original tools…
-
Add a function stm32_interrupt_enable for "C" in `interrupt.cpp` to call the `stm32_interrupt_enable` function from the C code `arduino_wrapper.c` of `MCCI_Sigfox_Image` library.
Add an topic as `T…
-
This repository is no longer maintained. The recommended alternative is the [MCCI version of LMIC](https://github.com/mcci-catena/arduino-lmic), which is based on this one, but has seen much improveme…
-
Hello, can you add region CN470 band code to the source code?
-
1) I'm using a 4460, but need to add an I2C device at addr: 0x50 where the Fram is located...
I see the FRAM8K driver and it has its address defined in the Mb85rc64ta.h file, so I can change it there…
-
I see the following in the TTN console, using the OTAA example. This tells me that the OTAA join only succeeds at the 3rd try.
![image](https://user-images.githubusercontent.com/948278/98484370-8d9…
-
Hi,
I have been testing my device under different fail conditions such, in this case I was testing what happens with an ACK is not received on a confirmed packet.
What occurred was that the packet…
-
**Consider raising support questions on the forum first**
There is a discussion site, [forum.mcci.io](https://forum.mcci.io), which includes a [category focused on the Arduino LMIC](https://forum.m…
-
It would be convenient to support two UARTs on 461x boards as well.
> Small correction: Only in 4630 and 4801 (To support PMS7003 and RS485 transceiver respectively) we enabled extra HW serial USAR…