-
- [x] ADC Test
- [x] Python Tests
- [x] AD2 Tests
-
As suggested in https://github.com/rsta2/circle/issues/280 I investigated the GPIO pinout of the (already known) external devices, which can be connected to a Raspberry Pi, when using MiniDexed and ge…
rsta2 updated
2 years ago
-
NanoPi NEO2 (DietPi bullseye)
```
uname -a
Linux [hostname] 5.15.25-sunxi64 #22.02.1 SMP Sun Feb 27 09:24:04 UTC 2022 aarch64 GNU/Linux
```
After latest kernel update my NanoHatOLED applicati…
-
- [x] is it dead? check if it turns on with power
- [x] connect to pi
- [x] check if we can get a response
- [x] fill in readDist() and read some distances
- [x] verify accuracy of sensor
- [x] …
-
Build fails on Orange PI Zero 2 (official debian image, latest updates):
`[Compile] wpiExtensions.c
[Compile] w25q64.c
[Compile] oled.c
[Compile] OrangePi.c
[Link (Dynamic)]
/usr/bin/ld: wpiEx…
-
I have a problem to compile the source under the following conditions:
Hardware: Orange Pi Zero
OS: Raspian GNU/Linux 8
uname -a
Linux OrangePI 3.4.39 #2 SMP PREEMPT Mon Nov 21 16:23:11 CST 2016…
ml-hn updated
3 years ago
-
Clean system, installation errors:
```
pi@orangepizero:~$ git clone https://github.com/orangepi-xunlong/wiringOP.git ; cd wiringOP ; ./build clean ; ./build
Cloning into 'wiringOP'...
remote: En…
-
This is related to #55, but created separate issue to understand more specifics.
Topic `Adding more libraries that control specific sensors or devices`
1. What is the appropriate naming conventi…
-
Have checked voltage on the pins of the ADC (MCP3004) - they are what they should be. But the SPI transfer is returning 0 no matter what.
-
Hi,
I'm trying to install AccessoryServer, but I have these errors:
```
pi@raspberrypi:~ $ sudo ./install_full.sh
sudo: ./install_full.sh: command not found
pi@raspberrypi:~ $ cd AccessorySe…