-
Scenario:
1. Client Registers with Drachtio Server
2. Client then generates a SIP MESSAGE event.
3. This event is visible on Drachtio Server.
4. However, the node application using drachtio-srf,…
-
## Describe the issue
Thanks for your integration!
I use "Mikrotik router integration for Home Assistant" in a country house.
There are 2 routers in my system: the main RBD53G-5HacD2HnD v7.4rc2…
-
## WS-2021-0468 - High Severity Vulnerability
Vulnerable Library - linux-yoctov5.4.51
Yocto Linux Embedded kernel
Library home page: https://git.yoctoproject.org/git/linux-yocto
Found in HEAD commi…
-
kfly8 updated
4 years ago
-
## Steps to Reproduce
1. Private project to reproduce this was shared here: https://developercommunity.visualstudio.com/comments/248226/view.html
2. Make sure to download both `softphones.zip` and…
-
SiLab's C8051 family is a relatively popular MCS-51 derivative. SDCC was popular in the C8051 community in the past, and is still used to some degree. But SiLabs dropped support for SDCC when they rel…
-
Hello, I am looking for an SBC that can be easily programmed from a host system and interface with that host system via a serial connection. This should not require any mechanic interaction (i.e. no p…
-
I just bought the new accucell 80W (with XT60 input connector and usb port), http://www.hobbyking.com/hobbyking/store/__64345__Turnigy_Accucel_6_80W_10A_Balancer_Charger_LiHV_Capable.html
After succe…
-
I'm not sure why, but adding on an extra CS/CU module does not modify the recommended CAP for future modules, even though this should have increased due to the lower number of MCs left
Steps to repli…
-
I'm running openwrt trunk (snapshot firmware on 5th October 2015)
device is (zbt-we1326), Thankfully 2.4 GHz is working fine.
```
root@OpenWrt:~# iw list
Wiphy phy1
max # scan SSIDs: 4
…