-
Hello,
as the E-mail address in commits is probably not working and I was not able to contact repo owner directly, I attach here just a small update for potential additional reverse engineering:
1. …
-
Latest firmware on MD-UV380 shows an offset of -3kHz between the frequency set on the VFO and the actual TX/RX frequency. Configuration of AT1846S registers is fine, problem may be due to an issue on …
-
The UV380 with fw v0.3.7 is unable to connect to WPSD hotspot, no response.
The UV380 can connect to WPSD fine with v0.3.6.
The WPSD behaves like when no valid call sign has been set.
I get the s…
-
This is a pretty goofy feature request and could be an example of the XY problem, but I want to open an issue about it anyway. I'm doing some adversarial firmware development for a TYT MD-UV380 DMR tr…
-
I don't see an issue tracking support for 8-bit FSMC buses. I forked the HAL for one of my projects that requires an 8-bit FSMC bus, but it ended up being a little complicated to add support for this.…
-
There are some differences in the codeplug and/or memory regions, the codeplug is written to between the GD77/RD-5R and UV380/UV390 variants of OpenGD77. To this end, the variant detection must be imp…
-
Using version 0.10.2 on Lubuntu. On prior versions of qdmr I've been able to read from and write to this radio without issue. When using 0.10.2 qdmr did not completely read from the radio. Zones were …
-
Is there a possibility to generate a 1750 Hz tone yet? Otherwise I will look if I could contribute that :-)
For the background: German FM repeaters use this tone to open a repeater, instead of CTCS…
-
About 30% of the time when I try to switch modes between M17 and FM Analog the radio switches to the new mode and immediately switches back to the old mode due to the lack of debounce. I'm running a d…
-
Hi
The OpenGD77 firmware now has APRS Tx in all supported radios. This includes Radioddity GD-77, Baofeng DM-1801, Baofeng DM-1801A, Baofeng RD-5R, TYT MD-9600 , Retevis RT-90, TYT MD-UV380, , TY…