-
This line is wrong:
https://github.com/coreycothrum/meta-mender-kernel/blob/fc6ea4e0120cd27fcfac5c8a60a3377fb7c2c9b2/recipes-mender/mender-kernel-state-scripts/files/abort-if-update-in-progress.sh#L1…
-
Hello,
We are using TX2NX SOMs on custom carrier board, our BSP is created with Yocto (dunfell) and based on meta-tegra.
Everything is working well since months, but recently we have trouble wit…
-
see: https://github.com/coreycothrum/meta-mender-kernel/issues/7#issue-1116521906
-
@coreycothrum I'm using a compulab board with an imx8mp part. They have a mender configuration that uses `mender-partuuid`. Integrating your layer I see
```
ERROR: mender-luks does not currently sup…
-
only the variable `mender_boot_part` is used to determine the active partition. During an update that is then inverted to determine what the new root candidate partition is.
That candidate is then …
-
**Description**
I'm trying to build a custom image with Yocto Dunfell to raspberry pi 4b(2GB), all build runs fine but when a burn the SD card, the rpi4 don't boot.
**Steps to reproduce the issu…
-
Hi @madisongh , I've previously tried this with L4T 32.5.1 and tegra boot tools and switching the boot with tegra-boot-control -a 1 worked fine, the second partitions (_b) were used for loading the ke…
-
I have successfully added rauc necessary bits and pieces to my cusotm layer and also build image which contains 2 rootfs. I've used https://github.com/rauc/rauc/blob/master/contrib/grub.conf for exper…
-
past the signing issue, last error i believe
digiserver in debug output
[2020-10-06 14:01:57 -0400] [22555] [INFO] Goin' Fast @ http://0.0.0.0:9999
[2020-10-06 14:01:57 -0400] [22558] [INFO] Starti…
-
I'm using this repo with a Xavier NX.
I'd say maybe 1 out of 5-10 times my `mender -install` update won't switch partitions. I can pop out my SD card and I can see the rootfs A/B images and I can …