-
Hi all here, im relatively new in micropython coding and im not sure how to manage to have a current time set in the board when it boots.
time.time() give datatimes values near 2050..
>>> time.lo…
-
Hi Andre,
I am using 2 x86 Intel CPUs and one microsemi PCIe switch between them. Ubuntu 18.04 is running on both CPUs. I am sure that the PCIe-switch is right configured and PCIe driver on both CPU …
-
Is it possible to synthesize these cores on the [Polarfire Evaluation kit](https://www.microsemi.com/existing-parts/parts/138273) (300k le) and if yes, what changes are required?
-
I git cloned, build and installed Kernel v5.10-rc6 but here the `ntb_hw_switchtec` driver fails to register:
```
[ 4.081135] switchtec switchtec0: failed to register ntb device: -12
```
Plus a …
-
It would be really good to include some information in the README around the resource usage of microwatt.
I would recommend the following stats;
- [ ] LUT + FF usage
- [ ] Highest fmax possible…
-
Hi @kerrydwong, fantastic project!!
We were able to make a demo board and adapt and extend some of your work to "straight" C for an ARM/FPGA application on Microsemi SmartFusion2 hardware. We al…
-
I am trying to transport data using IPoPCI via ntb_netdev. I am following the general outline given in step 4 of the "Non-Crosslink NTB connection for Linux" section:
https://docs.nvidia.com/drive/dr…
-
Since Microsemi is the steward of Smart Array technology now, they've started down the path of de-branding tools and products (no longer "HP" or "HPE", after all).
The day will come eventually whe…
-
I used a low phase noise signal source as my artiq frequency reference，The reference frequency is 100MHz
![1 100mhzlownoisesource](https://user-images.githubusercontent.com/87292167/175239583-5eada…
-
While I'd like to use one of these OS's, I fail to see the value added of this repos vs the authoritative repos. Ideally, I'd be able to find a repos that contains the entry.S that is necessary to beg…