-
I've picked up one of these beasties off Aliexpress and flashed it with Wthermostat
It _seems_ to work ok (and be using the same standardised commandset) however temperatures are not being recorded…
-
### Introduction
Hi, I'm Minco, PhD candidate in the Cees Dekker lab (Bionanoscience).
### Describe your research in 2-3 sentences to someone that is not from your field (please avoid abbrevia…
-
An example of the warnings:
```
Execution optimizations have been disabled for task ':jetpack-compose-optics:compileKotlin' to ensure correctness due to the following reasons:
- Gradle detected a…
-
Issue #162 seems to be how lock support came to be, and based on the description, I assume it's this lock (https://www.bunnings.com.au/orion-grid-connect-smart-wi-fi-entrance-lock_p0330511, which has …
-
SmartLife device after connect to cloudcutter AP but then SSL error appear and script stop.
Any help what I can reconfigure to proceed further?
Device is 2 gang switch unknown vendor (from sho…
-
Would it be possible to create a profile for the Aubess 20A plug?
Attached is the original firmware and the paired firmware ssid = hotspot, pass = abcdabcd
Pictures of the device:
![IMG_9183](https…
-
Starting from `CMSSW_12_5_X_2022-08-09-1100`, some workflows are failing with:
```
----- Begin Fatal Exception 09-Aug-2022 18:35:43 CEST-----------------------
An exception of category 'BadToken…
-
Hi!
I would really like to use my Minco Heat MH-1823D in Home Assistant. The MH-1823D is a thermostat for electric floor heating.
The following dps are available:
```
tuya-cli get --id CENSO…
-
hello i was wondering if you could add my map amickot
https://discord.gg/AmMrtDp2vR
to make it possible the following cities need to be added
@include "city/allen.sii"
@include "city/amber.sii"
@…
-
Product: [DS-102-2 Wi-Fi 2gang Light Switch](https://de.aliexpress.com/item/1005001698977140.html)
CPU: [WB3S](https://developer.tuya.com/en/docs/iot/wb3s-module-datasheet?id=K9dx20n6hz5n4)
Dump:
[…