-
Hi,
Two issues I am having:
1. CooCox.org no longer exists. You have to hunt around to find a copy to use.
2. When compiling I get the following errors with no mode pins defined:
compile:
…
M0XZS updated
4 years ago
-
When FW updated is installed it is shows Nano_hotSPOT-v1.4.10 20181008.
Would it not be better with MMDVM_HS_Dual_Hat or something to say its a duplex.
Also in the install_fw_duplex.sh it is st…
-
Hi all,
anyone experiencing delay while in DMR repeater(duplex) mode with mmdvm? I so delay that when i finish my sentence i can hear my own voice for half a second and then i hear the repeater's ACK…
-
Not sure if I am doing something wrong, but here is what I used in SSH and the results. "Failed to init device" I even did it twice, the second time checking that the folder was empty prior to down…
aa3jc updated
3 years ago
-
I'm managed to get this compiling but I couldnt see a concrete reference on how to use it.
From what I can tell you read the generated `ttyMMDVM0` to get data that the modem has decoded right?
H…
-
loopback problems on single MMDVM_HS (separate TX/RX freq but same band) acting as a remote gateway for fusion repeater. everything works fine but sometimes the MMDVM_HS will rx back to the network th…
DU8BL updated
3 years ago
-
Hi folks.
I have an issue running
> M: 2017-08-13 23:24:37.636 MMDVMHost-20170719 is starting
> M: 2017-08-13 23:24:37.636 Built 00:21:58 Aug 14 2017 (GitID #3749b8d)
and
> I: 2017-08-13 23…
m1geo updated
4 years ago
-
**Describe the bug**
Can not disable firmware DEBUG log,
@ON4AAK feedback
**logs**
```
M: 2024-06-01 20:07:38.738 Debug: M17RX: pos/neg/centre/threshold 5 -5 0 5
M: 2024-06-01 20:07:38.…
-
I have a square block in the mmdvm logo at the top left of the 5 inch screen
-
Hi,
when i compile MMDVM for STM32F105 /MMDVM_POG) i have a warning on SerialSTM_CMSIS.cpp
in the past i never had this king of warning.
SerialSTM_CMSIS.cpp: In member function 'void CSerialP…