-
Hi, I do have 2 SUN-12K-SG04LP3-EU one Master and one Slvae.
According to the manual 1 is the Master and 2 is the Slave. Each has a logger, so what do you think I need to add another solarman com…
-
## Expected Behavior
Poller keeps polling and data should be provided at all times.
## Current Behavior
I have a DAT11 configured as Modbus slave on TCP port 1800. In OH I have configured the Mod…
-
It seems like while I was trying to create a new spec I was able to invoke a high load from the container which I can't get rid of without erasing the data. Even deleting all modbus-slaves / busses do…
-
```
If on the master I write "modbus_construct (write, 2,
PRESET_MULTIPLE_REGISTERS, 254, 16, writeRegs2);"
because I want to write 16 bytes starting at position 254 in the
holdingRegs[HOLDING_REGS_…
-
```
If on the master I write "modbus_construct (write, 2,
PRESET_MULTIPLE_REGISTERS, 254, 16, writeRegs2);"
because I want to write 16 bytes starting at position 254 in the
holdingRegs[HOLDING_REGS_…
-
```
If on the master I write "modbus_construct (write, 2,
PRESET_MULTIPLE_REGISTERS, 254, 16, writeRegs2);"
because I want to write 16 bytes starting at position 254 in the
holdingRegs[HOLDING_REGS_…
-
```
If on the master I write "modbus_construct (write, 2,
PRESET_MULTIPLE_REGISTERS, 254, 16, writeRegs2);"
because I want to write 16 bytes starting at position 254 in the
holdingRegs[HOLDING_REGS_…
-
```
If on the master I write "modbus_construct (write, 2,
PRESET_MULTIPLE_REGISTERS, 254, 16, writeRegs2);"
because I want to write 16 bytes starting at position 254 in the
holdingRegs[HOLDING_REGS_…
-
```
If on the master I write "modbus_construct (write, 2,
PRESET_MULTIPLE_REGISTERS, 254, 16, writeRegs2);"
because I want to write 16 bytes starting at position 254 in the
holdingRegs[HOLDING_REGS_…
-
```
If on the master I write "modbus_construct (write, 2,
PRESET_MULTIPLE_REGISTERS, 254, 16, writeRegs2);"
because I want to write 16 bytes starting at position 254 in the
holdingRegs[HOLDING_REGS_…