-
-
## Version of the Custom Component
v.1.10.0b4
## Configuration
```yaml
Standard install - H1-5.0-E Inverter connected via Ethernet
Master Version: 1.48
Slave Version: 1.02
Manager V…
-
Hi,
Please help with my solar sistem, I can not see the power drain for the battery, is connected trough Huawei IP Modbus TCP and FreeDS can't see real power from the battery Luna2000
![Captură de…
-
So I discovered that in my MasterTherm installation I have access to instant local data via the Modbus TCP protocol. This is open and does not require and authentication or additional hardware.
###…
SeBsZ updated
3 months ago
-
### Which node-red-contrib-modbus version are you using?
5.26.0
### What happened?
I have had a problem with `node-red-contrib-modbus` Modbus TCP Client being "hung" (not firing attached nodes prop…
-
### Which node-red-contrib-modbus version are you using?
5.25.0, 5.31.0, 5.40.0
### What happened?
Modbus-Flex-Getter stops sending requests to modbus server after a specific set of messages
### …
-
A deviation exists between current power readings from our energy API and local Modbus TCP readings. Address this and consider changing to AC power (or add it) as it is more interesting from the grid …
-
I am currently trying to use the mega core with ArduinoModBus library, but when I go to build the project for the ATmega4809 I end up with a couple errors. Any chance I could get some help?
Docume…
-
### The problem
When using a docker image later then 2024.3.3 the modbus connection will fail after about two days and just comes back up when restarting the inverter and HA.
### What version of Hom…
-
The protocol is simply Modbus RTU (the serial protocol) or also just called "TELNET" tunneled over TCP at port 8080.
To read data "holding register" are read (that is the $03 byte after the Unit-ID…