-
I have this paho-mqtt python client (I have omitted some script logic and DB accessing for simplification):
```python
import json
import logging
import time
from paho.mqtt import client as mqtt…
-
### What happened?
- Valves were not controllable via MQTT messages, nor Z2M Frontend
- Those valves connected to the router directly show 0 Link Quality, however other Zigbee devices have not probl…
-
# Bug report
## Describe the bug
I configured my PixelClock initially for usage with a wireless network associated to a VLAN used by all of my IoT devices. Although I could see (and configur…
-
### What happened?
Hello,
Basically, about every 2 minutes, z2m restart.
I tried to look on logs, on debug, warning, ... to find the reason without success.
So far, I have integrated only 1 eq…
-
**Is your feature request related to a problem? Please describe.**
I am using OMG_lilygo_rtl_433_esp to capture 433 messages from my various sensors around my house and then post them to my Mosquitto…
-
Hello,
We have an architecture where IOT2050 reads data from a PLC using Modbus TCP (cycle 1s) and sends it via MQTT to a AWS private server. We use NodeRed for data reading and manipulation. We ha…
-
I admit that I am not familiar with MQTT and Home Assistant and I need some help:
In the following code:
...
const char* mqttServer = "192.168.1.200"; _**The domain or IP where the MQTT is insta…
-
Hello, I've recently changed my router and I've started seeing that anytime I bounce the router, my heatpumps reconnect with a temperature of 61F. This has been happening every time I make any changes…
-
When the Disconnect method is invoked with a specific reason code, the OnClientError callback is unexpectedly triggered with a net.ErrClosed error, even though the Disconnect operation itself returns …
-
We have gateway running on pi, dumb router, openwrt router with mosquitto, cascaded networks (subnetworks), potentially esp based mqtt repeaters, and maybe later some ble/lora/espnow bridging dongles.…
ulno updated
4 months ago