-
I can't use the LowPower library since there is a lot of stuff in conflict (like `period_t` types, etc.)
It's quite annoying since the MySensors library low power method helpers are not as customizabl…
-
Hi,
Many thanks for taking the time to build this - it's very much appreciated.
Going to test it later today as a workaround for no MySensors app currently existing (I'll give the MQTT MySensors cli…
-
Candle Manager installed correctly.
Candle Receiver installed correctly.
Up to there everything works OK.
Created a "temperature and more" device.
When installing the new device, the process sto…
-
I've got a few lights communicating via mysensors.
When activiating multiple lights via a scene from homeassistant, it fails to set all lights correctly.
The lights have soft signing enabled. I'm us…
-
@tekka007 I tried development version hex file `8MHz` from https://github.com/mysensors/MySensorsBootloaderRF24/tree/development/hex it did not work as expected. I noticed firmware request is too slow…
-
**Describe the problem you have/What new integration you would like**
Like to get water flow metering from smart water meters with IR eye via hardware similar to [Home Assistant Glow](https:/…
Hedda updated
1 month ago
-
using openHAB 2.3 and using MySensors Binding 2.4 I will get this error:
`2018-12-07 20:23:01.025 [ERROR] [ome.core.thing.internal.ThingManager] - Exception occurred while initializing handler of t…
-
```
21/5 19:37 [8159] - error: Error: Cannot find module '../public/src/translator'
at Function.Module._resolveFilename (module.js:338:15)
at Function.Module._load (module.js:280:25)
at M…
-
Automatic ID assignment doesn't work for RS485 transport.
As mentioned in this post https://forum.mysensors.org/topic/4854/building-a-wired-rs485-sensor-network/23 .
The problem is caused by:
- set…
-
I read on the forums and from the documentation that the nRF5 series are supported to some extent. I am wondering what does it actually take to get the gateway sketch running on the device?
Right …