-
uTimerLib.h line 150 references `_VARIANT_ARDUINO_STM32_` and this is for some reason not defined when I use Nucleo32 / NucleoG031K8, so the library compile borks because it doesn't know anything abou…
-
I just downgraded a project from PlatformIO to Arduino IDE.
- on PlatformIO I could install the 1.6.6
- on Arduino IDE I now can see the 1.6.5 only
This project starts and stop a timer (50ms inte…
-
During compilation I slapped my face into this message
```
"ESP8266 / ESP32 can only reach a ms resolution so any us interrupt will be rounded to that"
```
Reference: https://github.com/Naguissa/u…
-
I have been looking for your solution with the DS3231 for weeks and happily tried it.
I had to change a couple of things in your example code for the ESP8266, D1,D2 vs D3,D4 and DS3231 vs DS3232.
…
-
It is possible to achieve even more accuracy in timekeeping on ds3232 and it looks like it fair for ds3231 too.
http://www.kerrywong.com/2014/07/19/ds3232-clock-frequency-calibration/
If you happe…
-
Hi, I am using STM32 cores for STM32F109 version 1.9.0 with uTimerLib 1.6.0
my code in in essence:
#include "uTimerLib.h"
TimerLib.setInterval_us(timerEvent, 50000);
void timerEvent() {
tim…
AndKe updated
4 years ago
-
First, thank you for this library - appreciate the effort that you have put into it.
I see there was a closed issue already looking for an example of how to use the alarms. You have noted that ala…
-
Hi,
How is it possible to light sleep with arduino framework on the ESP8266, i know how to deepsleep and it works but i am interested to do LIGHT_SLEEP so i can benefit from "low power" equal to 0.5mA…
-
The set() function and the year() function both use a uint8_t to represent a year value. However, the maximum value available in that datatype is lower than the current year. There does not appear to …
-
Hello,
i'm running IDE 1.8.10 on a leonardo board, i'm using 3 displays without decimal dot connected, i've installed library usevensegment 1.0.0 and utimerlib 1.4.0 from the library manager.
Edited…