-
If I try to start the program with the weight sensor attached there are two beep sounds but nothing visible happens.
The program starts right into the gui without the sensor attached, but with the W…
-
I'd like to use this for four qwiic scale devices (https://www.sparkfun.com/products/15242, chipset NAU7802). Has there been any initial effort in this area? Anything I can help with?
-
Hello All,
I am using the Adafruit_NAU7802 library to read values from an S-Beam load cell using an Arduino. The serial monitor displays ta digital value "Read 1544" for example. If a compressive l…
-
Hallo,
I am trying to load the example Code of Adafruit NAU7802 but when its completed the usb port disconnects immediately.
I dont know what the problem. But that also happened with the Arduino P…
-
### Description
**Issue Summary:**
Our IoT data logger setup, integrating the [SparkFun Qwiic Scale - NAU7802](https://www.sparkfun.com/products/22956), is experiencing significant variations in s…
-
My board looks like this. The frtizing file looks like this.
![fr](https://github.com/adafruit/Fritzing-Library/assets/104156434/51e4b705-bc21-4d9e-b039-07b098eebe1f)
![br](https://github.com/adafr…
-
I am trying to use both channels of the 7802. I can calibrate and set gain on channel1 ....Works fine.
Is there a way to set the gain of channel 2 and assign different calibration factors to channe…
-
### Subject of the issue
I can't get my loadcell to work with openlog artemis. Not sure if its due to the load cell reporting negative raw values, but I'm just getting empty entries (not zeros in co…
-
Since the board is qwiic-compatible, DVDD will be 3.3V. The LDO should be set 0.3V lower than DVDD (data sheet). Measurements confirm that with it at the default 3.3V, AVDD is ~40mV lower, so not real…
jdfin updated
6 months ago
-
### Subject of the issue
Query about using the second channel
### Your workbench
This is generic, I have not yet designed my project
### Steps to reproduce
N/A
### Expected behaviour
I wo…