-
Presumably there is an assumption about the clock rate of the SoC and that's why.
Tested empirically (adjusting # of NOPs):
nRF51: 9,0,1,8
nRF52: 41,20, 20,41
This works ok for first LED on strip …
-
I have a custom nRF52810 based board connected via ST-Link v2 programmer. I have attempted using boards _Generic nRF52_ and _nRF52 DK_. Theoretically the nRF52810 should be identical to the nRF52823 o…
-
INA226 example code seems to work on ProMini hardware but not on the Bluefruit NRF52.
I have confirmed my Bluefruit NRF52 i2c functionality using a TMP100 sensor.
Any ideas?
Andy
-
Right now you can make your own NFC tag with Puck/Pixl.js with the NFCtag module or going bare metal like http://forum.espruino.com/conversations/354213/
Thing is we already support reading NFC ta…
-
Currently, `TIMER1_IRQHandler` calls `jshHadEvent` - so every timer event will take Espruino out of sleep and once around the idle loop.
On Bangle.js it's needed because the peripheralPollHandler d…
-
There are plenty of uses for libhydrogen on an nRF52 when the softdevice is not present or not enabled. There is a separate nRF5 SDK set of API calls for the random number generator when the softdevic…
-
Hi,
I am trying to flash a nordic nrf52832 with pyocd. When I try to flash a fw with softdevice included in same image (or if I flash first softdevice and then fw image or vice versa), the fw doesnt …
-
Hey!
I'm building an application based on the BLE Gateway example and never receiving any mesh events (never reach this code: https://github.com/NordicSemiconductor/nRF51-ble-bcast-mesh/blob/master…
-
### Platform
NRF52, ESP32
### Description
When connected to a meshtasticd node, the app is not displaying chUtil and AirUilTX for that specific node.
-
Serial implementation does not use DMA and this means it is quite interrupt intensive. This is problematic for time sensitive scenarios.