-
I am testing the BLE_uart.ino example with the NRF52810. The Tx characteristic works fine, but writing to the Rx characteristic causes a stack overflow error, interestingly after the data is received.…
-
I am using a NRF52810 with `` and when an attempt is made to notify with a characteristic length of greater than 339 bytes, the central does not recieve the data and onStatus indicates a return code o…
-
As Wayne reported [here](https://lists.launchpad.net/kicad-lib-committers/msg00547.html), there are some invalid footprint associations in Amplifier_Audio.lib which need to be fixed. They're old refe…
-
I am unable to get this to compile for an nrf52810 as it has no floating point unit.
Is it possible to change the freertos to compile without FPU??
I've added an entry for it in Boards.txt and add…
-
I have a nrf52840 and some of the pins are unavailable for use:
p0_09
p0_10
Is there a reason these pins are not available for use?
Gibbz updated
2 months ago
-
As a first step, we should ensure that it is possible to dump the stock firmware of the device.
-
Hi, after flashed 3.7 firmware to the new device, I'm able to read values in TelinkMiFlasher web page and ESPHome & Home Assistant. Unfortunately, the display always shows the same values (25.4 C and …
-
### The problem
I am trying to get a NRF52810-based iBeacon to be recognised. I have the integration installed and it has detected other devices in the past, but will not see this new one I have purc…
-
I'm using a custom board designed around nRF52832. Basic blinky works but the following code which used BLE as a serial port, doesn't.
```
[env:my_env]
platform = nordicnrf52
framework = arduino…
-
**Home Assistant Android app version(s):**
2024.7.3-full
**Android version(s):**
Android 14
**Device model(s):**
Samsung Galaxy S23 Ultra SM-S918B
Samsung Galaxy S24 Ultra SM-S928B
**Home…