-
https://github.com/Nuand/kalibrate-bladeRF/blob/7b06cf80137a19b72ea33b31c3664c5881299794/src/fcch_detector.cc#L318
`g++ -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT kal-fcch_detector.o -MD -MP -MF .dep…
-
After downloading the latest ADSB version FPGA (https://www.nuand.com/fpga/adsbxA4.rbf), i'm getting the following error:
[WARNING @ /privatehost/libraries/libbladeRF/src/board/bladerf1/bladerf1.c:…
-
Hi guys. I'm trying to do a GPS receiver with bladeRF x40. To do it, I am employing this configuration file [gnss-sdr_GPS_L1_bladeRF.conf](https://github.com/gnss-sdr/gnss-sdr/blob/master/conf/gnss-sd…
-
Hello,
i'm trying to acquire Galileo E5 signal for position fix.
GNSS-SDR runs without errors but i can't receive Galileo INAV messages. I'm using nuand bladeRF x40 equipped with u-blox antenna fee…
-
Looks like this repository depends on some modifications to gr-osmosdr, which even latest Nuand's [gr-osmosdr](https://github.com/Nuand/gr-osmosdr) repo does not contain..
Commenting ioctl stuff out …
-
It was suggested here https://nuand.com/forums/viewtopic.php?f=5&t=3792&sid=9ec2f9cc209b95243d1a1e92c5bbed22 that the FPGA firmware maintains unsigned 64-bit counters
(see: rx_overflow_count and rt_o…
-
The issue mentioned in https://nuand.com/forums/viewtopic.php?t=3792 was apparently never created, so I'll do it now - the only test using BLADERF_META_STATUS_UNDERRUN is the digital loopback test, so…
-
Hi,
please have a look on the output:
> Initializing GNSS-SDR v0.0.10 ... Please wait.
> Logging will be written at ./logs
> OsmoSdr arguments: bladerf=0
> gr-osmosdr v0.1.4-127-g4d83c606 (0…
-
I recently installed gnuradio 3.7.13.15 with pybombs. (ref : https://github.com/Nuand/bladeRF/wiki/Getting-Started:-Linux ) However, the installation of gr-aistx with pybombs failed.
It seems to b…
-
Hello, I am using the BladeRF blocks in Gnu Radio 3.10.1.1. I am using multiple bladeRF 2.0 Micro xA4.
These blocks allow a lot of things that are not possible with Osmocom or Soapy blocks, one of th…