-
One of the reasons I had for running klipper on the AD5m Pro was to use Octoeverywhere for remote connections! I had a feeling it wouldn't work, but gave it a shot anyways.
I had to run the script w…
-
My Obico is set to stop only the extruder heater when pausing a print when it detect a fail, but it also stop the bed heater.
The turn off bed heater was unchecked.
Any thoughts?
Thanks
-
Octoprint (for 3D printing) seems to best support HLS for mp4 (at least out of the box, WebRTS and MSE don't seem to work).
I am using a stream like the following for my PiCamera v3 on a RPi5
```
p…
-
The warnings:
> **Moonraker warning**
>
> Unparsed config option 'managed_services:
> moonraker-obico' detected in section [update_manager moonraker-obico]. This may be an option no longer avai…
-
Currently it is not possible to control / restart a printer / mcu that is turned off. It should possible to turn on the printer over the moonraker power control.
-
Hey, sorry for the noobie question.
I have the Bambu A1 connected to Home Assistant which is running on a Synology NAS.
The A1 is also connected to Octoprint, running on an OrangePi and using …
-
**Describe the bug**
When using Obico with OctoPrint, it shows the camera as a snapshot, and only updates when I reload it. On my OctoPrint, it shows the camera as a stream. Why is Obico not streamin…
-
Currently, whenever I hide or close the window in which Obico is running and then return to the window, the video stream stalls while buffer as presumably the streaming was interrupted while the windo…
-
**Is your feature request related to a problem? Please describe.**
Today you have to use a USB drive to transfer files to the Flashforge printers which is very cumbersome, and a big drawback compared…
-
How I can add an ip webcam to have 2 camera the first one works great on USB
flc85 updated
3 months ago