-
Board request: Seeed Studio SenseCap Indicator - ESP32-S3R8 - 8 MB Octal SPI PSRAM
https://wiki.seeedstudio.com/SenseCAP_Indicator_Dive_into_the_Hardware/
Thank you!
-
Hello.
i am trying to make work the "en_speech_commands_recognition" example, but when the wake word detect the watchdog resets the esp, so i disable the watchdog, and now when detect the wake word s…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
esp_lcd_panel_io_i80_config_t io_config = {
.cs_gpio_num = EXAMPLE_PIN_NUM_CS,
.pclk_hz = EXAMPLE_LCD_PIXEL_CLOCK_HZ,
.trans_queue_depth = 10,
.dc_levels = {
…
-
Lcd is not working . still is off state
DISP-PIN =3V or NC?
![IMG20231009170913](https://github.com/W00ng/ESP32-S3-RGB-Panel/assets/79097012/5c6ea93a-2a10-4494-b5ed-2274f5eeacdf)
![IMG202310091…
-
### The problem
Using a ESP32-S3-DevKitC-1-N32R8V, that uses a ESP32-S3-WROOM-2-N32R8V module, that is a ESP32-S3R8V, 32MB Octal SPI Flash, 8MB Octal SPI PSRAM, 1.8V SPI.
Programming a Flash siz…
-
Currently you cannot easily use any WROOM-2 based ESP32 Boards.
As far as I can tell, this is related to the flash mode used for all WR2-ESPs
Which seems to require OPI for both of PSRAM and FLASH
…
-
This is the main issue for adding new features to the existing SPI API.
- [x] Adding 3-wire support (half/full duplex modes) See #38386
- [x] Adding frame format selection (TI vs Motorola) See #3…
-
Using commit b0af377 I built an ESP32-S3 binary and attempted to create a second `SPI.Device` for using with the XPT2046 touch device, but the program hangs when attempting to instantiate it.
```
…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…