-
Task: Augment link stability by preventing rapid changes in link for a route.
| Status | Issue | Description |
| --- | --- | --- |
| Open | Issue 1 | All the adhoc interfaces are on the 10.0.0.0/16 s…
-
When starting a larger cluster with about >8 nodes the targets *may* get faulty routes:
```
# ip ro show table 1
default dev nsm-0 # Not good!
```
Return traffic is dropped.
The route sh…
-
If a route or prefix option in the configuration has more bits specified than the address length mask, Radvd should:
- warn or error.
- forcing the non-network bits to zero.
- collapse now duplic…
-
In one of my 15.2 based zones I see a lot of entries like
```
2015-10-28T20:03:30+00:00 server in.ndpd[14379]: [ID 102006 daemon.error] prefix_update_k(net0, net0:3, xxxx/64) from to ONLINK AUTO n…
jsonn updated
8 years ago
-
*Issue migrated from trac ticket # 11942*
**component:** wxHtml | **priority:** normal | **keywords:** wxHtmlHelpWindow, wxHtmlWindow, wxHtmlHelpController
#### 2010-04-14 02:20:27: flionetti create…
-
Idea would be to import the private tenant VRF and the internet VRF to the default VRF.
Therewith we get out of the default VRF.
The backwards routes are problematic: Cumulus has a list of constra…
-
When setting selectable = {true} for ParsedText, the copy option appears just fine on iOS on long press. But on android, it does not appear. I was able to see the copy option once in a while on Androi…
-
I believe I've run into a Docker bug, related to how NAT is performed on machines that contain a default route with multiple equal cost paths.
When running inside of docker I see 30-50% packet loss, …
-
I've just upgraded my VMs to one-context 6.8 which comes with the migration from `/etc/network/interfaces/` to netplan, and it seems to be breaking configurations where the gateway is on-link (outside…
-
You are given the following:
IP Address: A.B.C.D/32
Gateway: E.F.G.1
Now the default gateway is not on the same subnet as the host.
Here is the /etc/systemd/network/10-eth0.network generated…