-
# Required information
* Camera board id: SSC338q
* OpenIPC version: Majestic Fpv for SigmaStar, version master+ebdfe17, built on 2023-12-23
* modified majestic.yaml: yes
# Issue descript…
-
This parameter may reduce peak bitrate and make the flow smoother:
> The "h265cvbrMaxIprop" parameter specifically controls the maximum instantaneous bitrate proportion for I-frames compared to the t…
p0i5k updated
6 months ago
-
# Required information
* Camera board id: ssc338Q +NVR
* OpenIPC version: fpv
* Commit:
* Branch:
* Tag:
* installation method: (by manual https://github.com/OpenIPC/openipc-2.1/wiki…
-
I need a firmware with a driver MT7601 openipc-hi3518ev100-fpv-8mb.bin
-
gk7205v300+imx335_venc,nvr3536 ground station can be connected, but there is no video available.Through inspection, it was found that
~#ps | grep venc
887 root venc -h 127.0.0.1 -p 5600 -v 200_i…
-
please answer about my question.
no sudo command???
```
sudo
-sh: sudo: not found
```
install rtl8188fu & rtl8812au???
```
root@openipc-t21:/mnt/mmcblk0p1# ls
System Volume Informat…
-
Прошу помочь собрать прошивку для GK7205v210 для FPV с драйвером RTL8188EUS
-
Putting this one out here for discussion -
should we go back from using rtp exclusively for the transmission from air to ground to a different, more simple approach
(e.g. manually fragmenting fra…
-
Attempting a build for hi3518ev300_ultimate via the documented methods, initially got this error:
```
make[3]: Entering directory '/tmp/firmware/output/build/hisilicon-opensdk/libraries/sensor/hi351…
-
Если выбрать [на странице процессора HiSilicon HI3516EV300](https://openipc.org/cameras/vendors/hisilicon/socs/hi3516ev300) тип памяти NAND и версию Ultimate, то есть несколько несоответствий:
1. В и…