-
When I compiled the firmware, the Esphome shows the log as below, it seems that some of the configuration of climate has been deprecated.
> Compiling .pioenvs/opentherm_gateway/src/esphome/componen…
-
I understand this might be the wrong repository to ask such a question, however I was wondering if you have any information about compatibility with OpenTherm protocol specification v3.0. Unfortunatel…
-
..or otherwise be able to modulate the boiler gas valves for better fuel efficiency and longer boiler life?
Am I right in thinking the only way would be for the firmware to make a WiFi connection a…
-
Hello,
I recently ordered Opentherm gateway so i would be able to monitor and change temperature between my current gas boiler Baxi nuovola duotec+24 and existing baxi thermostat.
i was able to as…
-
Hi, based on the same library it seems to be possible to manage also the Gateway Functionality.
The hw needed is available from [Diyless](https://diyless.com/blog/opentherm-gateway-sample) .
The a…
-
My (Emat) S0-meters work fine, but once I turn on Opentherm processing, the readings become very noisy (spikes up to 50000 W). I have a Plugwise Anna + Smile thermostat, which is right next to the Hei…
-
There is error when compiling
Выдает ошибку при компилировании
`In file included from src/main.cpp:39:0:
src/opentherm_component.h: In member function 'virtual void OpenthermComponent::update()':…
-
Hello,
I can't turn off climate in HomeAssistant with this repository. I click on "Turn off" button and nothing happen. Here is screen:
![problem](https://user-images.githubusercontent.com/1154916…
-
Hi, sorry if I write here, but I didn’t found another way.
I’ve tried your ESPHome OpenTherm, that was modified with async calls, but it seems not work.
With the original repository by risciano I’…
-
My bowler need small pause (about 1-2 seconds) to send ch enabe, temperature etc after an opetherm initialisation. Now I make it using delay in on_boot automation. Wait and set value that I need from …