-
Design PCB that can be used to fully control the scooter.
It should have:
- [x] ESP32 microcontroller
- [x] Boost converter for headlight led 5V -> 6V (1.1W)
- [x] RGB display
- [x] Power b…
-
1) Подписать светодиоды что за что отвечает (исправлено)
2) Перепутаны NO и NC в реле на футпринте (исправлено)
3) Убрать 110 вольт постоянки (исправлено)
4) шелкография R7, R27, R215, (исправлено…
-
-
Need to have:
- Reset switch to clear things like bonding details
- Don't use the nrf52 power output to supply the RTC, the RTC can handle voltage as low as 1.1V, have both use directly from the t…
-
Design the circuitry that will interface with the Micro-controller and the PDLC sheets.
-
Hi Naomi!
Can you please upload the PCB files in format that does not require a paid PCB design software?
Or at least Eagle files.
What program creates that .PCB file?
-
1) Spec major components (proc, FTDI, accelerometer)
2) Spec support components (passives/oscillator, voltage regulator?)
3) Schematic
4) PCB v0
5) Order parts
-
We need someone help us design the pcb?
-
prototype a fully working schematic and create a pcb for it.
Should be mounted on the left inner side of the slide (where the mode selector is mounted). Goal is to have only one long pcb left, that t…
-
I'm creating this issue to keep track of the progress on the various circuit board designs needed for SimplePnP.
Remaining work:
- Main controller board (very similar to the head mounted control…