-
The example code from https://github.com/raspberrypi/pico-examples/blob/master/pico_w/wifi/access_point/picow_access_point.c#L293 shows the default IP address for the DHCP server is 192.168.4.1. When …
-
I was able to use your library, my PicoW connect to my WiFi.
Is there a way to reset the credentials information if I want to do further trials?
-
import webrepl_setup fails by default unless the user happens to have created a boot.py file on device. Creating an empty boot.py makes import webrepl_setup succeed and ask for a password and reboot.
…
-
### Platform
ESP32
### Assembly
I did the assebly by myself
### nRF24L01+ Module
_No response_
### Antenna
external antenna
### Power Stabilization
Elko (~100uF)
### Connection picture
- [ …
-
Support Arduino for Raspberry Pi PicoW
-
I have a Raspberry Pi Pico W Connected to a PiCowBell Proto - no other connections or modifications.
I am running CircutiPython latest stable for RPi Pico W: adafruit-circuitpython-raspberry_pi_pico_…
-
### The problem
A previously working device no longer compiles after updating to 2023.12.1
```
INFO ESPHome 2023.12.1
INFO Reading configuration /config/esphome/picow.yaml...
INFO Generating C+…
ausil updated
2 months ago
-
Hello. Long time no mess with....lol
Just picked up a couple Pico 2 boards and tried to install the firmware to one. Firmware copies to the "drive" when plugged in but it never seems to create a v…
-
As shown in the image I'm getting jittery results from the picow indoor around temperature readings
![jitter](https://user-images.githubusercontent.com/17680890/210399455-2f06faba-e23b-4818-ac7a-18…
-
The `pico_btstack` library `CMakeLists.txt` hard-codes all of the `btstack` source files. This means that it's tightly coupled to a specific `btstack` version.
This is causing problems for my proje…