-
(base) edgar@edgar-inspiron3493:\~/pycom-micropython-sigfox-heltec/esp32$ make BOARD=HELTEC
Use make SECURE=on [optionally SECURE_KEY ?= secure_boot_signing_key.pem] to enable Secure Boot and Flash E…
-
Hello,
First of all, congratulations for the project.
Could you tell me how to compile the library to use it on a Pycom Lopy 4? I use Linux and macOS.
Thank you very much for your time.
-
Hello,
I just upgrade the firmware of my wipy 3 to Pycom MicroPython 1.20.2.rc6
and now i have the error : 'UART' object has no attribute 'readall'
Wipy3 with most recent firmware.
uart.readall(…
-
The board I'm using is a TTGO T-BEAN V1.1 and also a V1.0
The firmware I've tried are:
[v1.20.2.r4-tbeamv1](https://github.com/nunomcruz/pycom-micropython-sigfox/releases/tag/v1.20.2.r4-tbeamv1)…
-
I am trying to setup VS Code with Pymark under Ubuntu 21.04.
First, I tried VS Code on my primary laptop (macOS). However, this does not appear to work on current builds of VS Code (https://github.…
-
# Please add more documentation on using Bluetooth / BLE
## Is your feature request related to a problem? Please describe.
At the moment the Pycom documentation for the BLE implementation only des…
-
Trying out the ```pycom.rgbled``` over the interactive terminal I get a rather long freeze of the pymakr interface. The code is not smart, and goes as follows :
```
import pycom
for i in range(0…
-
Hello guys
I have a LoPy4 v1.20.2.rc6 with Expansion board expansion31_0.0.11
Tried to load the example project "lorawan-nano-gateway"
After couple of hours (between 1 and 8) the LoPy crashes w…
-
Reading https://docs.pycom.io/pycom_esp32/library/machine.Pin.html#machine.pin.init Pin.ALT has been removed I guess. Is it ```Pin.OPEN_DRAIN - input or output pin in open-drain mode.``` ?
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy). Gpy
* The firmware version you are using. You can get it by executing …