-
**Describe the bug**
After running `west flash`, the jlink and nrfjprog runners leave the Coresight debug hardware enabled.
This increases idle current consumption by 1.6mA.
The hardware remains en…
-
As per definition the zigpy is implemented as Library for Zigbee devices.
Whoever all documentation I found is very focussed on HA.
I was under the impression that I could use zigpy as a pure pyth…
-
We asked Nordic about this request a few months ago, they told us that this feature would be considered for future nrfjprog releases? Is it already in? Or could it be added sometime soon?
We could off…
-
**Describe the bug**
We used to parse the RTT output from logger in our automated high-level testing. However, yesterday an error occured:
```
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x…
Qbicz updated
5 years ago
-
When using the MutliAPI, the close() doesn't clean up all threads.
Using the test code:
```python
from pynrfjprog.MultiAPI import MultiAPI as API
import threading
for i in range(1000):
…
pengi updated
7 years ago
-
on OSX
NRFJPROG lib won't pass "area is not erased error",
```bash
$ ./nrfjprog -f nrf52 --memwr 0x1000108c --val 0x12345678
Parsing parameters.
ERROR: The area to write is not erased.
```
``…
-
While on OSX, run setup.py with python 2.7.10 or python 3.6.2 failed with below message
Does anything missed?
~~~bash
File "setup.py", line 19
version = 0.0.1,
^
SyntaxEr…
-
since we discover the family by trial and error user has to seelct snr for nrf52 twice since that is tried after nrf52 if --snr not specifed.
-
When trying to use nrfjprog without having the SEGGER libraries installed it fails when trying to locate the libraries. I discovered this when trying to use the utility with my cmsis-dap adapter.
-
Versions: pynrfjprog==9.0.0, 9.2.1
Occasionally, when flashing our board, pynrfjprog crashes with the error below. We're not really sure how to debug this issue, and may have to consider switching …