-
Hello,
can you add support for multiple PZEM-004T modules? I would like to have full monitor of 3 phases of my house.
Thank you
-
****### I am not able to connect with my localhost.** below code is used
#include
#include
#include
#include
#include
#include
#define DHTPIN D2
PZEM004Tv30 pzem(4, 5);
float volt;
…
-
Olá Bruno,
Comprei uns pzem 004, a versão que veio é a V3, sabes se se consegue medir o sentido da corrente como a versao inicial onde isso era possível e como falas neste teu artigo? Cumprimentos
-
_This is a continuation/summary of discussion in https://github.com/lincomatic/open_evse/issues/175_
Current OpenEVSE hardware (as of April 2024) lacks a voltmeter, and the current meter is not too…
-
When the PZEM-004T V3 loses AC power it stops responding to esphome due to it requiring AC power.
It would be handy to have a timeout option that either zeros out all the sensor values or sets them t…
-
### The problem
Upgraded from 2022.9.1 to 2022.12.6 and can no longer connect to my QuinLED-ESP32-ABE board via ethernet. Reverting to 2022.9.1 does not resolve the issue.
Edit:
Also tried fla…
-
Please share the working code using your library.
-
Hi everyone. I try to read 14 PZEM-004T Sensor Module with single serial port (Serial2, RX16, TX17). But it like there is a limit for connections. just can communicate 5 sensors module randomly from 1…
-
My project is to datalog voltage, current, power, energy, frequency, and power current for 16 appliances using a **single PZEM** and **16 current transformers.** I use a **16-channel analog mux** in a…
-
Your lib "pzem-edl" supports PZEM-003/017, so can I use this module with ESPEM too?