-
sudo ./qmi_install.sh
Installing kernel headers for Raspberry Pi
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
raspberrypi-kernel-headers is al…
-
Hello,
I've installed OPNsense 22.1 on an APU2 with a Quectel EC25-EUX and i've compiled and installed the kernel module.
The modem was well detected and visible in PPP interfaces when it was in PPP…
-
Our usecase:
We develop an embedded iot product where we use defmt to store the logs into the flash of the device. When we have a defective device, the customer sends it back, and we can extract the …
t-moe updated
2 months ago
-
mt7981 rax 3000m
usb wwan speed is degraded when hwnat and hwnat with wed is enabled (10-100Mbps)
when hwnat is turned off. USB wwan speed returned to normal (500Mbps)
-
Hey first off thanks for the awesome guide. I love to learn new things and cellular tech is a pretty fun way for me to save some $ on internet.
I'm a bit stuck though and just thought I'd reach out…
-
Excuse me, if I need to deploy llama2 on Qualcomm Snapdragon chip through ExecuTorch and want to use NPU computing power as an inference computing unit, what do I need to do?
The chip specs I'm cur…
-
I'm using a GPS tracker with u-blox and Quectel GPS modules, sending NMEA data with 4Hz = 250ms rate decoded with TinyGPS++
However, the Quectel data time stamp has always "00" centisecond, whereas t…
-
I hope this is the right place to collect information for a driver for this module.
Otherwise let me know I would move the content elsewhere...
Maybe also there is an ongoing effort somewhere for th…
-
Tested with commit 4333888cb8025b92511597a95859943fae0a0bc8 on `aarch64`, applied a small patch to see what's going on:
```diff
--- a/quectel-timesync.c
+++ b/quectel-timesync.c
@@ -117,3 +117,4 @…
-
Hi there,
I've been trying to modify TinyGSM to work with Quectel MC20 GNSS/GPRS module for a few days now. I've updated every single AT command used in the library to use the command set specified…