-
Hello for the first time.
I am from Slovenia and I do not know if this is the right place but I will try.
I am using OpenTX 2.3.9 latest stable version on my FrSky Horus X12S radio. All worked OK be…
-
Hardware used: KISS FC v2, Wolf PDB rev2, R9MM, M8Q, X9D+ (otx 2.3.14) with R9M 2019 ACCST flex latest firmware 190117)
RX Configuration: FPort (ACCST flex latest firmware 190201)
Reproducer: with…
-
Is there a plan to add support for the long range systems (TBS CrossFire/FrSky R9)?
By taking apart the R9M and the R9 I own, I found they are based on the SX1276 LoRa chip from Semtech (https://www.…
-
* QSP Success:
* sleep
* transmit
* receive after TX is done
* on QSP failure
* sleep
* receive again
-
我运行了你的demo 在oppo R9m手机上出现了录音结束之后正常回调了 但是列表未有刷新 重新进入可以刷新列表 录音结束之后再次长按可以响应录音事件,但是 列表同样没有刷新 都需要重新进入 出现问题的手机版本为Android5.1 在其他手机上未发现此问题
-
I've done everything by the book, I'm running a Taranis X9D+ with a relatively recent OpenTX and two FrSky links: either the internal one or a R9M. I've soldered the BT inverter. The telemetry in Tara…
-
Hi Jonathan
Great little project..... Just experimenting, and seems to work.
I appreciate this is still very experimental, but I can see this is opening up nice possibilities.
I noticed, it doe…
-
Any change to get Access protocol on the Taranis X9D+ with external R9M 2019 module like it has been recently done with the TX16S?
Thanks
-
会出现如下报错
主要集中在这些款机型
#00 pc 000187b0 /data/app/com.pa.health-2/lib/arm/libmarsxlog.so [armeabi-v5te]
--
2 #01 pc 000188d5 /data/app/com.pa.health-2/lib/arm/libmarsxlog.so [armeabi-v5te]
3 #02 p…
-
i wonder , atmega on OLRS can work with a IBUS output instead SBUS ?
IBUS is faster SBUS ? right ?
This is the testing result captured from one of the testing video:
Flysky i6X – 13.7ms
…