-
Hi,
I'm using raspberrypi 3B+ and run install.sh,
However when I using nexutil ,I got this error.
root@raspberrypi:/home/pi# nexutil -Iwlan0 -s500 -b -l34 -vm+IBEQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA…
-
**Environment**:
* OS name: raspbian
* OS version: latest
* Architecture: 64bit arm
* ntopng version/revision: ntopng Enterprise M (Embedded) v.6.1.240628 (Debian GNU/Linux 11 (bullseye))
*…
-
callsign routing does not work when qnetgateway is configured for dualstack when the target cs is ipv4 only. For some reason
Oct 27 17:56:28 raspberrypi qngateway[60335]: starting CIRCDDB
Oct 27 …
-
There were some breaking changes of [earle's core & SDK2 with micro ros](https://github.com/micro-ROS/micro_ros_platformio/issues/153#issuecomment-2426751782) so I'm using some older version of platfo…
-
### The problem
Trying to install HA on a Pi 5 running the recommended desktop OS. Used a tutorial to install. but got an error (below) during installation.
```
(homeassistant) zed1@raspberryp…
-
Hello, any chance to have a working image for the RaspberryPi 5 ? Or at least a workaround.
The RaspberryPi 4 doesn't boot. It complains about not being the right architecture.
-
Files:
pi@raspberrypi:/opt/kamstrup $ ls
config.yaml daemon.py kamstrup_meter.py kamstrup_meter.pyc mqtt_handler.py
pi@raspberrypi:/opt/kamstrup $ pip install pyserial
Looking in indexes: …
-
Um eine alternative Infrastruktur zu erstellen welche nur Arduino und RaspberryPi beinhaltet, gibt es mehrere Schritte, die wir beachten sollten:
----------------
1. **Hardware-Verbindung:**
- D…
-
### Describe the issue you are experiencing
I'm trying to install RaspberryMatic on my RPi4 to use it with Home Assistant on the same device.
I did all the installation steps, but installing/usage o…
-
Hello,
I am the maintainer of ESPAsyncWebServer (https://github.com/mathieucarbou/ESPAsyncWebServer).
We have rpi support, with:
```
[env:raspberrypi]
upload_protocol = picotool
; platform…