-
UPDATE: need someone to build for pico_w. All attempts fail due to not knowing where all configuration files stem from, where they go, and what they pertain to. setting in VScode vs cmake for wind…
-
I want to post data from sensors over HTTPS in JSON format, and ideally, also using MQTT.
This seems very difficult with the C API, but is trivial with the `urequests` API in MicroPython.
On the…
-
Add SD Card support for the onboard microSD/TF Card slot on the AIV DC31 Badge, as CircuitPython on the PicoW/Badger 2040W uses up 1.5/2MB onboard flash alone, before BadOS + it's assets and any user …
-
This may be something I don't grok about how the UART and the wifi chip interact. Here's the setup NOT using wifi:
I have a PicoProbe connected to SWD and to UART0 (GP0 and GP1). Anything I print…
-
Dear Pico Fellows,
the DHT Sensor example does not work.
I get always bad data.
It seems the code is written not robust enough, and also less comments.
Is it fine for you when I provide an impro…
-
I upgraded my Enviro Weather board to v0.0.9 on Friday evening and it worked perfectly until early Sunday morning when it went unresponsive. Brought it inside and found that it wouldn't appear at all …
-
Is there a minimum clock speed the RP2040 must have for the driver to work?
If I run it at 48 MHz then the test pattern check at https://github.com/georgerobotics/cyw43-driver/blob/main/src/cyw43_ll.…
-
### The problem
Trying to download the install manually or installing via usb or wireless provides this error message:
Most likely a config issue with the docker container, but I have been unabl…
-
Error about ipstack not an avaiable option in platform file.. Reverting from 4.1.1 to 4.1.0. sand it works again.
-
When using new Pico W together with the DHT22 sensor I get a reading the first time I run the code. The second time and all the following I get the ENOMEM error. I need to physically disconnect and re…