-
I've been using your repo on a very old raspberry pi model B v 2.0 running Linux raspberry pi 6.1.21+ with great success. I had to use a USB dongle for Bluetooth, but it worked without a hitch.
I…
-
Great work on this, I managed to use it to pair to my 100ah lithium battery via the hub from my laptop. Great little starter kit to build a monitoring dashboard.
-
I am all but certain that this is not an issue with Solar Shed. That being said, I had a perfectly working system running on a Raspberry Pi, everything was being stored in Prometheus, charted with Gr…
-
Hi.
The for the Renogy Rover CC, it would be great if the script can also report history, daily generation (kWh), and min and max values
thanks
-
Trying to figure out how to use this, would like to monitor my solar panels and send the data back to a grafana server at my house. i figured out how to run the setup.py build and install but i cant f…
-
My Renogy Rover 60A works like a champ! I thought I would try to use the same code for the Renogy Shunt 300 with Bluetooth, but that didn't work so well :-( It doesn't like the request payload.
…
-
Hi all, I need help with these error on vedirect.
All was working good until I updated to emonSD-08May21
I’m getting checksum errors, but it doenst happen with older version of emonSD
Any help??
…
-
I was able to pull data from my DCC50S via the Renogy hub on ID 96. Perhaps this is different between the DCC controllers and the Rover controllers? Might be worth mentioning in the readme.
-
Add this special RJ12 RS232 to USB cable which is specific to the Renogy Rover to the Amazon parts list.
[https://www.amazon.com/Charger-Controller-Converter-Adapter-Chipset/dp/B07JGRJR4V/ref=sr_1_…
-
Hey Cyril,
Thanks for writing this software, it works great.
I am trying to use a converter/cable to go directly from the Rover RS232 port to computer, without using the Bluetooth module. Have …