-
Can you add a flag to enable the bluetooth discovery? I have 3 of the H6058 and they are very slow over the API, I suppose via bluetooth it will be much better.
It is odd because when I use with my…
-
Hi,
Sorry it's not an issue about this project but it was the only way I found to contact you 😅
I saw recently a PR from you on the RFlink-ESP project.
I was thinking that the alexa protocol th…
-
I seem to get an error continuously
Now trying to initialize hardware 'CC1101'
Initialized CC1101(freq=433.92Mhz,br=9.600kbps,rxbw=250.0khz)=-104
CC1101 SetOOK(true)=0
CC1101 setPromiscuousMode(…
-
Hi All,
I have some problems with MQTT lights and Home Assistant when MQTT Broker is for a moment offline and come online again.
When this happen some lights went on and others keep off. I really …
-
Hi all,
I am testing the RTL_433 branch as the master did not detect inFactory-TH sensor.
But after ~5 Minutes the device suddenly reboot and than completely stops working some time later.
I am u…
-
Hi all,
I'm using the RFLink gateway MQTT of Domoticz 2022.1 together with the espRFLinkMQTT software on a Nodemcu.
Receiving 433Mhz sensors works great but switching a switch doesn't seem to work…
-
Hello,
My remote Telis 4 Modulis RTS5 Channel Pure Hand-Held Remote 1810765 has Open and Close button.
I can send prog, Up (one step), Down (one step), My command.
But I do not know how to sim…
-
Hi all,
I'm using the RFLink / WIFI koppelprint which can be purchased for the RFLink. This PCB holds an Nodemcu V2.
The Nodemcu V2 is reset by the Arduino Mega with the RFLink software when the A…
-
First of all many thanks for this wonderful project :D
I was using RFLink and wanted to switch to something better ^^ and since I had a CC1101 lying around...
I have 4 sun awnings on my windows fr…
-
Last night it was still syncing, today I have found a big red warning on the snapshots page. Restarting core or host not helped.
###### Description:
```
If you have anything else that could h…