-
Hi uChip,
this board is excellent! Do you have design of board for RFM69CW ?
I have RFM69CW and want use RFM69CW on this board and like me this half-shiled with serial flash which I have too.
Many t…
-
The checkin on Jun 1 (adapted changes from fixInterrupts branch) broke the RF12_COMPAT mode. Turning on RF12_COMPAT in RF12.h results in a compile failure in RF69.c:
...\jeelib\RF69.cpp: In function…
-
When the rf module is high stressed and/or far from other nodes the checkmessagereceived return ever false and i can not send on my rf module.
But if turn off and on the device it start work again.
I'…
-
Hey,
First of thank you very much for the guide, it's really helpful to have an updated one so I didn't have to work from the one made for the previous version!
It might be just me though, but I'm r…
-
Hi Luke,
I'm not an expert, but I modeled the current amplifier in LTSpice and it doesn't appear to have enough gain.
You are using a 0.005 Ohm shunt resistor, so at 10A this will give you 0.05V AC …
-
Hi.
My setup stopped a few hours ago. Here's what my logfiles show:
2013-03-24 07:36:52,413 INFO Serial RX: > 0i
2013-03-24 07:36:52,419 INFO Serial RX: config save failed
2013-03-24 07:36:52,421 W…
-
As Lua RTOS makes intensive use of read-only tables, a series of optimizations can be performed on the program's bytecode to speed-up the program execution. This can help that programs written for Lua…
-
I am starting to RFMifying my HR20s and was running into the issue, that it has become more and more difficult to acquire RFM12-modules directly in Asia, as the manufacturer has ceased production of t…
-
So I've been thinking about the state of Heimcontrol and possible new features, so I figured I'd share.
## Application Structure
- Heimcontrol's client side is a perfect example for a real-time single…
-
The next big thing is to build some open hardware sensors for pimatic.
The Quest is to build a hardware 433mhz sender based on arduino or a ATtiny AVRs that collects environment data like light inte…