-
I read your wiki/blog.
As future step in stead of the CC1101 you could also use the very popular RFM69.
In the jeelabs eco system there are various OOK decoders. It might be worthwhile to take a loo…
-
Hello,
I don't see the support of the aes hardware encryption provided by the RFM69.
Do you use it ?
I use it well on an arduino plateform with this library https://github.com/LowPowerLab/RFM69 , but…
-
Hello,
I use a esp32 pico with an RFM69.
Everything works fine except with the use of energy saving mode.
Solution 1:
Deel Sleep
The frames are sent but not processed by ESP32 (server).
I re…
-
If I'm understanding correctly, when MY_GATEWAY_FEATURE is defined, ATC is disabled which makes perfectly sense since every node will report a different RSSI and there is no need to change the tx leve…
-
Hi,
I'm trying to setup a RFM69 MQTT gateway on an ESP32, but I'm facing random resets caused by InstrFetchProhibited according the output of the ESP.
I'm using
- version 2.3.2 of Mysensors,
…
-
Hello,
I have implemented your lib to use RFM69 with Arduino MEGA. I will use your lib on this device because I will use this with Ethernet shield. All incoming Data will be OK, but when is send an…
-
Hi. I noticed you have a pin called "G0" for the RFM69 under the "Hook up" section in readme for the Nanohab. Is this correct? I cannot find a pin called G0 on my RFM69 breakout board? Should it have …
-
Add the below line in library.properties
includes=WSN_RFM69.h
-
I've pondered making a version of the C code that supports Arduino with the RFM69 module.
The C code would run on the arduino, with a loop() that provides serial port access to sending and receiving …
-
Hi, great library!
One problem though is that the base class (RFM69) already has a bunch of specific functionality built in. For example, the packet layout is fixed, and you have no direct contro…