-
RP2350 has 3x PIO: the new one is not available for use (sm_id as 8...11), just 2x PIO for RP2350.
Please, extend for 3x PIO.
-
In the `2024-10-16` build of the RP2350 Datasheet, under [Section 2.1.3 Atomic Register Access](https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#2.1.3.%20Atomic%20Register%20Access) ther…
-
The Raspberry Pi Foundation unveiled the new RP2350 micro-controller a few days ago. A brief summary of changes and additions:
- Utilizes faster and more powerful Cortex-M33 cores (ARMv8 architecture…
-
Now users are starting to see the new Pico2 on the RP2350 chip.
Is it possible to organize the code here so as to also get the firmware for the ZX-Spectrum emulator for the new Pico2?
-
Can you please add support or documentation for running against RP2350?
-
I wanted my Pico 2’s default architecture to be risc-v, so set CRIT1_BOOT_ARCH (`picotool opt set crit1.boot_arch 1`).
The chip now runs at one third the nominal rate (50 MHz instead of 150).
-
@aallan @petewarden Please consider updating this [pico-tflmicro](https://github.com/raspberrypi/pico-tflmicro) port of TensorFlow Lite Micro library with all the latest changes from upstream TensorF…
Hedda updated
1 month ago
-
RP2040 successor : https://dmitry.gr/?r=06.%20Thoughts&proj=11.%20RP2350
* 2x Cortex-M33F
* improved DMA
* more and improved PIO
* external PSRAM support
* variants with internal flash (2MB…
-
According to the RP235x datasheet, there are 6 spare IRQs which can be used for software interrupts:
| IRQ | Interrupt Source |
|-----|-------------------|
| 46 | `SPAREIRQ_IRQ_0` |
| 47 | `SPAR…
-
Please consider looking into adding platform support for the new RP2350 MCU and the Raspberry Pi Pico 2 development board.
RP2350 is the successor and next-generation of RPi RP2040 so guess would n…
Hedda updated
2 months ago