-
You can control the fan speed on your fan hat by using macros and I2C. Just install the gcode shell command klipper plugin (manually or via Kiuah), enable I2C via `raspi-config` and then use there
…
-
Hi, I just got my RPi Grove kit but am stuck at the Nightlight experiment.
I am getting the message _Check whether I2C enabled and Grove Base Hat RPi inserted_
My hat has the MM32 chip instead…
-
is it possible to send AID from Android app to RPi - Waveshare NFC HAT 532 ?
I tried using your python code but I am getting no device found error.
-
Hi.
I have this panel:
![IMG_20210107_184541](https://user-images.githubusercontent.com/4441007/104048384-09db8080-51db-11eb-9dda-af7599edc451.jpg)
![IMG_20210107_184546](https://user-images.gith…
-
I tried to send a CAN message from a RPi with RS485/CAN Hat to another RPi withRS485/CAN Hat. I don't know why the RPi on the receiver side is unable to receive the messages. Though if i create a virt…
yazyr updated
6 months ago
-
### Describe the bug
Hi,
I'm currently building a 4 channel microphone HAT for the raspberry pi based on the AC108. Something similar to the respeaker 4-mic array [respeaker 4-mic array ](https://…
-
I am using a GrovePi Plus HAT with several sensors attached on a Raspberry PI. The board has both digital and analog ports. I could readout the sensor values without any problem with previous OS versi…
-
Hi all,
Am using waveshare SX130x LoRaWAN Gateway Module/HAT for rpi 4.
I want to integrate the sx1302 lorawan packet forwarder with aws server it requires aws key, certifates, trust certificates.
…
-
I have a Codec Zero on a Pi Zero 2 W running the latest PiOS Lite 64bit Bookworm in headless configuration
/proc/device-tree/hat/name:hat
/proc/device-tree/hat/product:Pi-CodecZero
/proc/device-t…
-
Hi, first of all, thanks for your work on this project :pray:
I've just tried running nixos from the example repository (both build from sources and using the published images) but my rpi5 gets st…