-
Just wondering if you've considered adding sondehub.org upload support?
SondeHub has a simple API for submitting data to, and is usually fairly easy for RS41 data. DFM sondes have a few quirks arou…
-
Currently the per-sonde info area is updated packet-by-packet. This means that if only some stations are uploading a particular field of interest (e.g. the new rs41_mainboard data), then it might only…
-
olá tem algum programa para transmissão somente em CW que de para ouvir em FM? quero colocar o beacon em CW num morro próximo da cidade onde o pessoal com HT consegue ouvir em modo FM.
Grato
PY2OA…
-
Requested by Terry D.
-
Do you need to install python-eventlet?
-
Need to rebase dft_detect and the wxr decoder, and add a new sonde type which uses a 60 kHz tone spacing.
https://github.com/rs1729/RS/issues/56
-
**Describe the change**
@thaifoon makes the following comment:
> I would urge to switch the profile synchronization, whenever possible, to GPS time-based synchronization. I am becoming more and m…
-
I am building this very simple project to transmit in WSPR in the 2m band with ESP8266 and Si5351.
See web page:
https://antrak.org.tr/blog/esp-wspr-simple-and-inexpensive-wspr-transmitter/
sketch…
-
Request to mod the RS41ng firmware to use the serial port on the RS41 and DFM17 to set and permanently save the operating parameters (Callsign, Mode, Rate, Freq.) instead of having to use a config fil…
-
Following some collaberatiion on Facebook group Radiosonde UK, we found a workaround for an issue we had with the code not uploading the new frequencies - possibly on on later softare versions of RS41…