-
can you please share the schematic for connecting? i have tried with rs485 without sucess :(
-
@txubelaxu Hi! I'm trying to understand your project and if I understood correctly, you connect the inverter to the battery via rs485 via CAN bus and simultaneously receive data from the…
-
Hello,
This is not an issue but just a suggestion: why not controlling the pump via rs485? you can set the rpm as a percentage and the pump will reply with the watt usage. This is the way I control m…
-
Witam
Posiadam model Sofara KTLX-G3 który ma złączę COM i USB
Próbowałem użyć złącza COM podłączając się do pinów 5 i 6
> piny 1,2,3,4 = Monitorowanie falownika i sterowanie systemem
> piny 5,…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
@Xerxes31415 will design and create the latest board revision
## Overview
The Open Source Sex Machine (OSSM) is undergoing a significant board revision to version 3.0. This update focuses on improvin…
-
Hey man! Kudos for this amazing project.
Is there any chance on getting my new Nissan leaf battery pack with jk bms to communicate with my asw3680 hybrid inverter via rs485
I guess the inverter doesn…
-
Hi,
I applied overlays to beaglebone black but cannot use RS485 overlay.
When I try to make MODBUS communication with UART4, the RTS pin cannot be set.
I can use usbtoRS485 converter and abl…
-
So,
i've found an Inverter Boot Issue with my RS485-ESP-Module Communication to my PV1800 System:
When the Inverter is completetely off and switched on with the ESP Online and RS485 Cable connecte…
-
I have 2 t-vending boards and I am trying to use the RS485 onboard, but still not sure what have to be done to power the RS485 circuit?
I measured and is 0v.
Update! 12/20/2023 , I was measuring …