-
Is there support for RTL8710CM yet?
I have a couple of devices (Tapo L920 LED controllers) using this chip and would love to be able to flash them with libretuya/esphome.
-
Hi
I'm attempting to flash my S3-WIFI-ST stick but I can´t even get serial comms to works.
I hooked up the module to my [FTDI adapter](https://www.aliexpress.com/item/32650148276.html).
Set the…
-
I am trying to flash a Woox R5077 (tuya wifi bulb) wifi RGB GU10 lightbulb. Today i already did it succesfully with one, but i didn't use that bulb for some time with the tuya app. The one i'm trying …
-
LT 1.5.0 crashes on EMW3080 (RTL8710BN clone) as reported here: https://github.com/hn/ginlong-solis/issues/22
LT 1.4.1 works fine on this MCU.
The crash is caused by https://github.com/libretiny…
-
This is what I'm getting when doing "install" via HA:
```
INFO ESPHome 2024.2.1
INFO Reading configuration /config/esphome/helo-power-strip.yaml...
INFO Generating C++ source...
INFO Compiling …
-
Found in Teckin smart plug model SP23. Posting this info here in the hopes someone else is gonna add this board, or at the very least that it may be useful to someone in the future. I don't currently …
-
Is there supposed to be an easy way to create a UF2 file with a custom app size. The boot log of my device looks like:
```
ROM:[V0.1]
FLASHRATE:4
BOOT TYPE:0 XTAL:40000000
IMG1 DATA[1128:10002000…
-
Hi, sorry if I'm being exceptionally dumb here, but what's the difference between the `generic-rtl8710bn-2mb-468k` and `generic-rtl8710bn-2mb-788k` boards? The board definition json for each seems ide…
-
Hi
Not an issue with the project or the code but asking here anyway in case someone else wonders and can look up this ticket.
"Set the MCU to UART boot mode (pull TX pin low during boot)"
I a…
-
Dear Developer,
Pls kindly check and advise if possible to add support for flw data:
"gw_di": {
"abi": 0,
"id": "bf820b121719650882hvkl",
"swv": "1.0.5",
…