-
Hi, I hope this finds you well.
I need assistance with obtaining filex drivers for the above mentioned board, my goal is to run the demo application example that is included in the api.
User gu…
-
**Describe the bug**
When restarting a debug session after rebuilding my .elf file, the previous build is started by the debugger unless I clean the build folder first.
**To Reproduce**
B…
-
If you try to update the cmsis packs in Mbed OS with `python project.py -m STM32F7xx --update-packs` it will start downloading the pack files.
For a few ST packs, you will get the following error …
-
**Description**
Driver implementation assumes that only sam0 SOCs with `REV_SERCOM == 0x500` has error interrupt flags, whereas all supported sam0 SOCs except the samd21 actually supports them. This …
atnon updated
2 months ago
-
- My goal is: Getting the Device Dashboard Demo running out of the box, on the ATSAME54-XPRO board.
- My actions were: Compiling the source using the X32 compiler from MPLab X IDE.
- My expectation …
-
#### Description
These issues want to keep track of `MODULES`/`PKG`/`CPU`/`BOARD`s that are not modeled in Kconfig. Things already modeled at the time of this issue are not included.
Help is ver…
-
I am currently developing a board with the ATSAME51J19A as soc and I am facing a problem with the activation of the can bus. I have added can0 and can1 to the soc in the .dts file. The same error occu…
-
#### Description
#### Steps to reproduce the issue
Attach the REB215-XPRO module to the `same54-xpro` board and flash e.g. `gnrc_networking` with the `at86rf215` module enabled.
#### Ex…
-
It is required to have a device simulator.
An alternative to solve this situation is to create a **simulator.**
Do by software what I'm expecting from the hardware.…
-
### CircuitPython version
```python
Adafruit CircuitPython 8.1.0 on 2023-05-22; SAM E54 Xplained Pro with same54p20
```
### Code/REPL
```
]0;🐍Done | 8.1.0\Auto-reload is off.
Running in…