-
I have installed octoprint on a raspberry pi 4B (2GB) and used that for quite some time a few years back. For over a year, I have not used my 3D printer so octoprint has unused since then. I am curren…
-
when I burned the bookworm image formed from the give steps and burn it into a sd card of 128gbs, it is creating a root partition of only 2.1 gbs which is 97% already used. Due to this we cannot downl…
-
Hi,
I've been trying for a good few hours to get this working on my Raspberry Pi this evening to no avail :( The first hurdle was to get a working copy of Arch as they no longer publish SD images. On…
-
V4 extended..
Allow images to be (timestamped and) saved to a folder on an attached SD card (AI-THINKER has a SD card slot)
* Trigger button in UI
* Timelapse?
* Face recognition triggers?
* Na…
-
Be able to build a brand new SD-card image with all required software from scratch quickly and easily.
-
I started up the SD card image with a 5" screen I have but it isn't touch. If I ALT+F4 out of the application I cannot find a terminal or the like to relaunch it in Dev Mode to use the mouse.
Is it…
-
## So here's the breakdown!
1) we have been using the same installation setup provided in the documentation.( https://xilinx.github.io/Vitis-AI/3.0/html/docs/quickstart/vck190.html )
2) We are u…
-
### Batocera build version
4- 2024/08/13 15:49
### Your architecture
Orange Pi 3 LTS
### Your Graphic Processor Unit(s) (GPU)
Integrated
### Issue description
In V38 everything works fine. But …
-
On this line for setting up a Raspberry Pi:
https://github.com/project-chip/connectedhomeip/blob/6e31453ed626768f9c74bc9e59ffae7a7137999f/docs/guides/BUILDING.md?plain=1#L125
It says "Using `rpi…
-
RPi 5 4GB
64 GB SD Card.
Unpacked pinn64 v3.9.2 from: https://sourceforge.net/projects/pinn/files/pinn64/pinn-lite.zip/download into a blank FAT32 formatted 64 GB SD Card.
replaced contents of cmdl…