-
Hello, first at all, good job on all these project.
I tried to prepare the case to print but there are some errors on them, maybe the mesh is not is not closed in some points. There are some plugins …
-
Hi
Tried the Robotic Liberation demo by pwp. The first file "liberation.prg" loads and runs but then crashes back to the "READY." prompt without running any of the demo. I've tested the D64 on Vi…
-
Hello!
With the KFF the Tapecart is successed on the C64. But it would be the greatest tool for the VIC-20. Why? There are no Multiload Games. I technically tried the Tapecart on the VIC-20 and it …
-
Thanks for making this handy script! Have you looked at decoding the JiffyDOS protocol at all?
I'm not sure if the VICE logs are enough, but I've been looking at some specs here: https://github.com/…
-
I built LittleSixteen but I had only the C64 keyboard.
The keyboards are very similar, but the C64 keyboard doesn't work with the C16.
I found this article
[https://www.amigalove.com/viewtopic.ph…
-
It seems that there are issues with expansion IO modules, e.g. the datel midi cartridge, or the FM-YAM, working with the ultimate 64 (I am using the latest U64 Elite rev and firmware)
Does specific…
-
Hello,
Could you please add support to EasyProg to upload CRT files from uno2iec?
When I try to open a cartridge image to burn to an easyflash, I get the error message "Cannot open this file". The…
-
## Feature Request / Idea
Do you think it will be possible to implement some little API via the command channel 15 to allow access to the SD card (to load/write single files directly on SD / switch …
-
As taken from Glenn Holmer's commentary on https://www.youtube.com/watch?v=jtlAOdJmeDI&t=134s
This is a discussion item. Actual work will happen on subsequent issue items.
Here are some initial t…
-
EasyProg is the utility used to flash .BIN and .CRT files to the various “slots” in the EasyFlash 3 cartridge. EasyProg itself is a .PRG file and may be loaded from either the EasyFlash cartridge or f…