-
### Describe the issue
there are two SUN2000-10KTL-M1 on one dongle. 16,4kwp in summary and 8,2kwp on each inverter.
In Home Assistant i see only the data of one inverter. In Home Assistant i have …
-
Hi,
Merry Christmass!
i've got a problem with the integration since the last software update of the inverter. Before that everything was fine, but now i have this error: could not connect to Huawei…
-
### Describe the issue
Hello,
My inverter gives me the Value 5000w Then 0 Then 4900W …… what is wrong
This is After Update
The Same by Meter data
### Describe your Huawei Solar Setup
Inverter…
-
**Is your feature request related to a problem? Please describe.**
When configuring "Charge Home Battery" on low grid prices, the charging is started, but only with 2500W. 2500W (dis)charge is the li…
-
### Describe the issue
I had to change the battery for a faulty hardware, the inverter now reports battery_1_type = 0 which is NONE as stated in huawei-solar.register_values and battery_2_type=2 whi …
-
### Describe the issue
After Update to latest home assistant core, the integration fails to load.
Restart, reinstall failed... / wont fix it.
`Logger: homeassistant.setup
Quelle: setup.py:334
…
-
### Describe the issue
I've installed latest build (8e77b6c), after that I got the error in the title
### Describe your Huawei Solar Setup
Inverter Type: SUN2000-6KTL-L1
Inverter Firmware version:…
-
Hallo,
kurze Frage, kann sich einer vorstellen, woran es liegen kann, dass ich mit node Red und diesen Flow Daten erhalte vom Wechselrichter und über den Modbusadapter nicht? ich habe schon alle mögl…
-
Hello,
I'm struggling to setup my system in HA, having a double inverter, one linked to a battery, the other to the Power Sensor and the other 2 batteries.
In configuration.yaml I did as follows:
`…
-
### Describe your feature request
Hi Thijs,
Just wondering if it might be possible to add an 'Inverters' function, same as you've added the 'Batteries' function in v1.4.0x? (& Disabled by default)…