-
I have a zynq_zybo board which has a built-in UART, connected to my lab server via a micro-USB cable. The UART appears when the board powers on and goes away when not.
At present I am seeing this o…
-
For a testing application we are using ser2net to connect to serial consoles, and we are using the RTS pin (via an optocoupler) to "press" a button on the device. Sometimes, when connecting to ser2net…
-
### What happened?
Device: https://www.zigbee2mqtt.io/devices/AB3257001NJ.html
If I switch ON or OFF the device using the physical button, Z2M doesn't update the state.
Pressing the state upd…
-
instructions from: https://git.lavasoftware.org/lava/pkg/docker-compose
Ubuntu 21.10 Desktop
1. install docker and docker run hello-world works
2. sudo apt install docker-compose
3. docker-compose…
-
I have a Z-Bee Duo Ser2net wifi adapter. how do i change the wifi configuration. I have to connect to a new wifi line. I tried the "reset" and "flash" buttons but nothing
-
These issues are attributed to ser2net, but most likely are rooted in the underlying UART connection (which involves particular USB2UART adapter, its driver, etc.). However, some of the issue could be…
-
Hi Pete,
I've attached the Emu2 to a linux box running HA in docker. Also, i've installed the new ser2net and I can telnet into the server, being able to see the broadcasted information from the em…
-
FYI this device should support additional commands such as timers, I have the device's MCU source [here](https://github.com/jameshilliard/stm8_stdperiph_lib-sw16_20150706/blob/master/STM8S_StdPeriph_L…
-
Add option for modbus to usb converter.
Currently, there is only the option to use a modbus to ethernet converter when using this integration. I am reading the modbus values using a modbus to usb c…
-
Hi all,
Because it is often difficult to find usefull address on the many kind of Viessman product and because we could not find any documentation from Viessmann,
has anyone aver made an addres…