-
Hello! I'm using macOS with a custom esp32s3 board. When I connected the usb cable to the serial JTAG, it shows correctly:
However, I cannot use `espflash` to access the board without specifyi…
-
The method [`.readBytes(byte[] buffer, int bytesToRead)`](https://fazecast.github.io/jSerialComm/javadoc/com/fazecast/jSerialComm/SerialPort.html#readBytes(byte%5B%5D,int)) wont fill the byte array.
…
-
```
Hello,
I have android 2.3 from TI site and now on second sd card I put rowboat ICS
version. On my 2.3 I'm able to run pppd via /dev/ttyS2 port.
But on ICS log cat show me 'Couldn't get channel n…
-
```
Hello,
I have android 2.3 from TI site and now on second sd card I put rowboat ICS
version. On my 2.3 I'm able to run pppd via /dev/ttyS2 port.
But on ICS log cat show me 'Couldn't get channel n…
-
```
Hello,
I have android 2.3 from TI site and now on second sd card I put rowboat ICS
version. On my 2.3 I'm able to run pppd via /dev/ttyS2 port.
But on ICS log cat show me 'Couldn't get channel n…
-
working with edison, explorer and pingrf sw. My understanding is that when connecting to edison, spi would be the primary communication path. Are the serial ports on cc111x wired to communicate with e…
-
Hi,
thanks for sharing your mods. I like the direct extruder and the BananaPi-Octoprint.
I also added `#define SERIAL_PORT_2 2` to my marlin config, but didn't get the serial connection working.…
-
Hello,
I'm fairly sure I'm doing this correctly but I am unable to open the serial connection to flash a CB3S with OBK.
I am using this USB to TTL module
https://www.aliexpress.us/item/3256805987…
-
Can NeoGPS support two gps strings from two hardware serial ports? I need to print the location of both and give distance, heading and directions from one to the other.
-
```
Hello,
I have android 2.3 from TI site and now on second sd card I put rowboat ICS
version. On my 2.3 I'm able to run pppd via /dev/ttyS2 port.
But on ICS log cat show me 'Couldn't get channel n…