-
```
INFO ESPHome 2024.8.0
INFO Reading configuration /config/esphome/air-gradient-pro.yaml...
Failed config
interval: [source /data/packages/76b4402f/packages/display_sh1106_multi_page.yaml:192]…
-
Hello,
I'm having trouble getting the following code from Sensirion working on my ESP32-S2 dev board. https://github.com/Sensirion/arduino-i2c-sgp41.
I've made the following addition to the Sensir…
-
Hello.
using a SCD41 sensor on an ESP32 board, yes I use latest firmware of 1st April 2024.
What happens is after some times (some hours) the sensor freeze and from the web interface I see "0" as …
-
Hello,
I am having problems with the CO2 reading of my Airgradient Pro DIY (with an d1_mini).
I don't know what is causing this so I just throw out there what I do know:
![image](https://github…
-
I've been running the ajfriesen firmware for my AirGradient Open Air sensors and decided to try your firmware, as it's been updated more recently.
However, with the Open Air and the most recent f…
-
I can see you've given a few suppliers references for the components, wondered if you'd thought about a single supplier solution like PCBWAY?
-
`********************************************************************************
If you like PlatformIO, please:
- star it on GitHub > https://github.com/platformio/platformio-core
- follow us on …
-
## Do not report new issues related to this message, instead please comment on this issue with the logs that you see and the config for that component.
### The problem
```
[00:00:00][W][compone…
-
Hi, I'm been trying to get any reading from my sgp41 sensor with a seeeduino xiao and no success.
I'm using the example in this library. It gives the serial number but in the selfTest answers "not en…
-
In the `sgp41_get_serial_number()` function, the `serial_number_size` parameter is unused:
https://github.com/Sensirion/embedded-i2c-sgp41/blob/f5e439f09cbaaf13c6a30c9788beafab1e466171/sgp41_i2c.c#…